Installation and Service Manual
for ERP25, ERP252, ERP50, ERP502, ERP75, ERP752
Thank you for purchasing the ERP series
rocking piston compressor. This instruction
manual explains the product operations
and gives important precautions regarding
its safe use. Please read and follow these
instructions to experience years of trouble
free service on these top of the line units.
To avoid accident, do not use the
compressor in any way other than as
described in this instruction manual
especially when you see “WARNING”.
After reading this instruction manual, keep it
nearby as a reference in case questions arise
during use. If this instruction manual should
become lost or damaged, ask your nearest
dealer or representative for another copy.
Installation
WARNING! Electrical Shock Hazard. Disconnect electrical power at the circuit
breaker or fuse box before installing this product. Install this product where it will
not come into contact with water or other liquids. Install this product where it will
be weather protected. Electrically ground this product. Failure to follow these instructions
can result in death, fire or electrical shock.
Correct installation is responsibility of installer. Make sure of proper installation conditions
and that clearances do not block air flow.
Blocking air flow over the product in any way can cause product to overheat.
Mounting:
Mounting the product to a stable, rigid operating surface and using shock mounts will
reduce noise and vibration.
Rocking Piston Compressors
ERP Series
ERP Series
ERP Series
ERP Series
ERP Series
