Clas Ohlson D6004CK, Руководство пользователя

Страница: 6 / 84

6
E
n
g
li
s
h
3. Alarm Installation
3.1 Alarm Installation
The video recorder has an internal circuit for sounding an alarm. This is normally open (NO), but closes once the
sensor is activated so that an alarm/siren (not included) sounds.
N.B. Contact a qualified tradesman for more information on an appropriate alarm and installation instructions for
purchasing an alarm that is suitable for your purposes. Two-step alarm installation:
1. Connect the positive (+) lead from the siren/alarm to the alarm port on the back panel.
2. Connect the neutral (-) lead from the siren/alarm to the power adaptor.
4. DVR system installation
4.1 Hard disk installation
N.B. Never remove the hard disk drawer when the DVR is in use. The DVR must be turned off when the hard
disk is removed otherwise the hard disk may sustain damage.
N.B.
Make sure the DIP switches are set to “Master” on the hard disk before mounting. Read your hard disk
instruction manual if you are unsure.
Hard disk mounting procedure:
1. Open the front cover on the front panel (by pressing
the middle of the cover’s upper edge). Remove the hard
disk drawer.
2. Mount a SATA hard disk (Max 1 TB) into the drawer.
Secure it with the included screws.
3. Push the drawer (with the mounted
hard disk) into the opening and lock
the drawer with the drawer key.