Clas Ohlson D6004CK, Руководство пользователя

Страница: 11 / 84

11
E
n
g
li
s
h
6.10 Motion Detector Setup
Motion detector settings.
It is possible to individually adjust the motion sensor
for each camera.
There are 3 different settings:
• “On/off”
• “Level” (sensitivity):
Level 1 = low
Level 2 = normal
Level 3 = high
• “Area” (selects the activation area which sets
off the motion detector). Select the area to be
detected with [

] - [

] - [

] - [  ] and then
press [SEL] to select the marked area to be
activated by the sensor. The selected sector
activates the sensor. Only the clear areas are
detectable. The shaded areas are not.
6.11 Hard Drive Setup
Hard disk settings. Displays hard disk status and
settings. Available settings:
• “Overwrite Enabled”
o ON (writes over the oldest files once the
hard disk is full) or
o
OFF
(stops recording once the hard
disk is full).
• “HDD Size” displays total hard disk capacity.
• “HDD Used” displays used hard disk space.
• “HDD Format” erases all recordings on the hard
disk. (Note! Before formating you must enter the
password
111111 ).
6.12 Miscellaneous Setup /
Change Password
Changing passwords.
Passwords must consist of 6 characters/symbols.
• Enter your “Current Password” first.
The preinstalled password is 111111 .
• Enter a new password (consisting of 6
characters/symbols) in the “New Password” field.
• Re-enter your new password in the “Confirm
Password” field.