Clas Ohlson D6004CK, Руководство пользователя

Страница: 10 / 84

10
E
n
g
li
s
h
6.7 Record Schedule
Recording schedule settings.
Scheduled recordings allow you to customise your
recording times.
Time is shown in AM/PM (12-hour clock)
• Select the desired time with [
 ] - [  ] and press
[SEL] the required number of times to change the
setting between:
No-Record No recording
Normal-Record Normal recording
Sensor-Record Sensor controlled recording.
N.B. To activate recording press [  ] to start recording
once you see the camera image on screen. If the
recording mode is set to
Normal-Record recording will
start immediately. However, if the recording mode is set
to
Sensor-Record recoding will not start until activated
by the motion sensor.
6.8 Sensor Setup
Sensor settings.
Record and alarm duration settings:
• “Sensored Record Time” Selects the number
of seconds recording will progress after being
activated by the sensor. Press [SEL] to adjust the
recording time (5 – 30 seconds).
• “Alarm On Time” Selects the number of seconds
the alarm will progress after being activated by the
sensor.
OFF mode (no alarm), 5 – 30 seconds,
CONT (continuous alarm. Shut off manually by
pushing any button).
6.9 H/W Sensor Setup
External sensor and alarm setup (not included).
N.B. External sensor and alarm not included. Sold
separately.
• There are 3 different settings:
NOT INSTALLED
,
NORMAL CLOSE
(normally closed) and
NORMAL OPEN
(normally open).