3
English
Trolley Jack
Art.no 41-2001 Model TA820037
Please read the entire instruction manual before using the product and then save it for future
reference. We reserve the right for any errors in text or images and any necessary changes
made to technical data. In the event of technical problems or other queries, please contact our
Customer Services (see address details on the back).
Safety
• Make sure that you have read and understood the entire instruction manual before using
the product. Do not use the product if you are at all unsure how it works.
• The product is only intended for normal domestic use and only in the manner described in
this instruction manual.
• The product is only intended for lifting vehicles; do not attempt to lift anything else.
• Make sure that the saddle of the jack is centred under the lifting point before beginning to lift.
• If the front wheels of the vehicle are to be lifted, the rear wheels should be chocked (and vice-
versa) or prevented from rolling in some way before lifting is commenced.
• Never use the product to lift any type of lawnmower.
• The product must not be used to lift people.
• If the product stops working or binds while under load, another jack with equal or larger load
capacity must be used to raise the load so that the product (and any axle stands) can be
removed safely.
• The product must be maintained and repaired in accordance with the manufacturer’s
recommendations. All repairs must be carried out by qualified service technicians using
genuine spare parts. Contact our Customer Service Department if your jack is in need of repair.
• The user must be able to oversee both the product and the load during the entire lifting
operation. If the load slips or if any other dangerous situation arises, the lifting operation must
be discontinued immediately.
• The product has a maximum lifting capacity of 2000 kg. Never attempt to lift anything which
exceeds this capacity as this could result in personal injury or damage to the product or
the object you are attempting to lift.
• The product is only designed for lifting loads on hard and level surfaces, strong enough to
bear the weight of the object to be lifted. The product must not be moved whilst under load.
• Vehicles must only be lifted by placing the jack under the lifting points specified by
the manufacturer of the vehicle.
• Immediately after it has been lifted, the vehicle must be supported on axle stands.
• Use the product for lifting only, not for supporting the lifted load. Support the vehicle on axle
stands if you need to go under the vehicle for any reason.
• Never place any body part under a vehicle that is only being supported by a floor jack.
• The product has no adjustable components but the hydraulic system may need to be purged
of air (refer to the
Bleeding
section below).
• A safety inspection should be carried out before each use. Check that no screws, nuts or
R-clips are damaged or missing and look for any signs of an oil leakage. Check that no parts
are bent or cracked. Never use the product if it is leaking oil or has been damaged in any way.
