background image

Rev. 11/8/2016 

    

CJ-BEAM, MANUAL 

                             Copyright 2016 Vestil Manufacturing Corp.                      

Page 1 of 7 

 

 

 

 

 

                 

 

 

CJ-BEAM Trailer Stabilizing Jacks  

Instruction Manual 

 
 
 
 
 
 

 

 

 

Receiving instructions:

  

After delivery, remove the packaging from the product. Then, inspect the product closely to determine whether it 
sustained damage during transport. 

If damage is discovered, record a complete description of the damage on 

the bill of lading

. If the product is undamaged, discard the packaging.

 

 

Notes:

 

1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the product 
is 

used

 is exclusively the responsibility of the end-user.

 

 

2) VESTIL is 

not responsible

 for injury or property damage that results from failure to apply either instructions in this 

manual, or information provided on product labels.  

 

 

 
 

Vestil Manufacturing Corp. 

2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 

Telephone: (260) 665-7586  -or-  Toll Free (800) 348-0868 

Fax: (260) 665-1339 

www.vestilmfg.com

    e-mail: 

[email protected]

 

 

Table of Contents: 

Signal Words……………………………………………..……………………………………………………………..………….. 2  
Safe Use Recommendations……………..……………………………………………..…………………………..…….……… 2  
Specifications…………………………………..…………………………………………………………..…….………………… 3 
FIG. 1: Exploded parts diagram & bill of materials………...…………………………………………………………………… 4 
Using the jack………………………………………………………………………………………………………………………. 4 
Installation of optional foam-filled wheels……………………………………………………………………………………….. 5 
Inspections & Maintenance……………………………………………………………………………………………………….. 6  
Labeling Diagram………………………………………………………………………………………………………………….. 6 
Limited Warranty…...…………………………………………………………………………………………………………..….. 7 

Содержание CJ-BEAM








Отзывы: