Clas Ohlson 38-2945, Руководство пользователя

Страница: 15 / 76

15
E
N
G
L
IS
H
6.3 Setting the IP address
• DHCP Client
Mark this alternative if your network has a DHCP server. This will allow your
print server to obtain a valid IP address from the DHCP server.
• Fixed IP Address
Mark this alternative if you will personally input a fixed IP address.
You must then also enter the Device IP Address, Subnet Mask and
Gateway Address.
• Device IP Address
Enter an available IP address in the network being used.
• Subnet Mask
Use the same net mask that is used in your network.
• Gateway Address
Enter the IP address for the network’s router.
6.4 Connection settings
• Delay before reconnection attempt
Set the number of seconds the print server will wait before attempting
another connection. This range can be set from 0–255 seconds.
The normal setting is 0 seconds.
• Number of reconnection attempts
Set the number of attempted connections before the connection is
terminated. This range can be set from 0–255 attempts. The normal
setting is 254 attempts.
6.5 Wireless transfer settings
Click on Wireless - Basic.