Clas Ohlson 38-2945, Руководство пользователя

Страница: 8 / 76

8
E
N
G
L
IS
H
(d). Turn on the print server
(connecting the adaptor
to the mains and
connecting the DC plug
to the print server).
(e). Make sure that the LEDs
show (Status, Error).
Status (green) should
light and Error (red)
should be off. The printer
is off or disconnected if
the
Error light (red) is lit.
Continue by clicking
Yes
if both the
Status
and
Error
lights are off.
N.B. It can take up to 30 sec. before the Error light disappears.
N.B.
• In order to use the LAN interface it must be connected with a CAT-5 cable
BEFORE the print server is turned on.
• The LAN interface (including cable) must be used during basic setup.
• The wireless connection will shut off if the print server is not connected to
the LAN (including cable) when the print server is turned on.
• In the wireless infrastructure mode the wireless interface will turn off
if a CAT-5 cable is connected.
If the above is already done you can click
Skip
.