Clarke Strong-Arm 7610500, Инструкция по эксплуатации и техническому обслуживанию

Страница: 3 / 10

Safety Precautions
WARNING
Failure to comply with these rules and precautions, may result in loss of
load, damage to, or failure of the equipment, or even personal injury.
1. DO NOT exceed the load capacity for each jib position (as marked on the
jib). The capacities for each model are shown in tables on the inside front
cover.
IMPORTANT:
If the load capacity decal becomes worn or illegible, contact Clarke
International Spares Division, on 020 8558 6696 for replacement.
2. Ensure that the equipment is correctly assembled, and that all the bolts and
pins are in place and secure.
3. Only use chains, slings, hooks etc. with a rated capacity equal to, or greater
than that of the load. Check that they are secure and will not slip under load.
4. Only use the crane on a solid, flat, level surface which is capable of taking
the load. Avoid moving the crane over rough surfaces.
5. Lower the load as much as possible before moving the crane. Do not use the
crane to transport loads.
6. Do not stand under the load, or above the jib. Be aware that if the load slips
or falls, the jib may rise suddenly.
CHC500DF 500 400 350 250 2000mm
CHC1000DF 1000 800 650 450 2450mm
1 2 3 4 Max Lift Ht