Clarke
®
Operator's Manual - MP-1800 Marble Polisher
FORM NO. 70193B - 3 -
OPERATOR SAFETY INSTRUCTIONS
DANGER
means:
Severe bodily injury or death can occur to you or other personnel if the
DANGER
statements found on
this machine or in this Owner’s Manual are ignored or are not adhered to. Read and observe all
DAN-
GER
statements found in this Owner’s Manual and on your machine.
WARNING
means:
Injury can occur to you or to other personnel if the
WARNING
statements found on your machine or in
this Owner’s Manual are ignored or are not adhered to. Read and observe all
WARNING
statements
found in this Owner’s Manual and on your machine.
CAUTION
means:
Damage can occur to the machine or to other property if the
CAUTION
statements found on your
machine or in this Owner’s Manual are ignored or are not adhered to. Read and observe all
CAUTION
statements found in this Owner’s Manual and on your machine.
DANGER!
Failure to read the Owner’s Manual prior to operating or attempting any service or maintenance procedure to your machine
could result in injury to you or to other personnel; damage to the machine or to other property could occur as well. You must
have training in the operation of this machine before using it. If you or your operator(s) cannot read English, have this manual
explained fully before attempting to operate this machine.
To reduce the risk of
fi
re, use only commercially available
fl
oor cleaners and waxes intended for machine application.
Risk of explosion. Floor sanding can result in an explosive mixture of
fi
ne dust and air. To reduce risk of explosion, use
fl
oor
sanding machine only in well-ventilated area.
Operating a machine that is not completely or fully assembled could result in injury or property damage. Do not operate this
machine until it is completely assembled. Inspect the machine carefully before operation.
Electrocution could occur if maintenance and repairs are performed on a unit that is not disconnected from the power source.
Disconnect the power supply before attempting any maintenance or service. Always remove the electrical plug from the
electrical outlet before changing the brush, pad or other attachment and before leaving the machine.
Using a machine with a damaged power cord could result in an electrocution. Do not use the machine if the power cord is
damaged. Do not use the electrical cord to move the machine.
WARNING!
Maintenance and repairs performed by unauthorized personnel could result in damage or injury. Maintenance and repairs must
be performed by authorized personnel only. Keep all fasteners tight. Keep adjustments according to speci
fi
cations.
Electrical components of this machine can “short-out” if exposed to water or moisture. Keep the electrical components of the
machine dry. Wipe the machine down after each use. For storage, keep the machine in a dry building.
Always use a three-wire electrical system connected to the electrical ground. For maximum protection against electric shock,
use a circuit that is protected by a ground fault interrupter. Consult your electrical contractor.
To prevent damage to the power cord, do not let the brush, pad, pad driver or wheels touch the power cord when the machine is
running. Always lift the cord over the machine. Do not pull the power cord to move the machine.
Operating a machine without observing all labels and instructional information could result in injury or damage. Read all machine
labels before attempting to operate. Make sure all of the labels and instructional information are attached or fastened to the
machine. Get replacement labels and decals from your authorized distributor.
Use of this machine as a step or furniture could result in injury or damage. Do not use this machine as a step or furniture. Do
not ride on this machine.
To avoid injury keep hands, feet and loose clothing away from all moving parts of this machine.
Injury to operator or bystanders could occur if an abrupt change in
fl
oor surface texture is encountered when using this machine.
Abrupt change in
fl
oor surface texture can cause a sudden pulling motion by this machine. This sudden pulling motion can result
in loss of control of the machine which could injure the operator or bystanders. Avoid motions that could cause machine to cross
from a smooth
fl
oor surface to a carpeted or rough texture
fl
oor surface Avoid motions that could allow the machine to come in
contact with low obstacles, such as
fl
oor electrical outlets, door stops or entry molding, etc.
Water solutions or cleaning materials used with this type of machine can leave wet areas on the
fl
oor surface. These areas can
cause a dangerous condition for the operator or other persons. Always put CAUTION signs near the area being cleaned.
Any alterations or modi
fi
cations of this machine could result in damage to the machine or injury to the operator or other
bystanders. Alterations or modi
fi
cations not authorized by the manufacturer voids any and all warranties and liabilities.
CAUTION!
The machine is heavy. Get assistance before attempting to transport or move it.
Note: This machine is for commercial use.
EN
https://harrissupplyind.com - To Order Parts Call 608-268-8080
