MADE IN USA
INSTRUCTION
MANUAL
S460W WET BELT SANDER
Страница 1: ...MADE IN USA INSTRUCTION MANUAL S460W WET BELT SANDER ...
Страница 2: ...CE SHIELD FOR PROTECTION KEEP HANDS CLEAR OF THE SANDING AREA NEVER WEAR GLOVES OR LOOSE FITTING CLOTHES WHEN OPERATING THIS MACHINE ALWAYS KEEP HAIR TIED BACK AND COVERED LET MACHINE ROTATION COME TO A FULL STOP BEFORE CHANGING BELT KEEP SAFETY GUARDS IN PLACE DO NOT ALTER GUARDS OR MACHINE IN ANY WAY ANY ALTERATIONS TO GUARDS AND MACHINE COULD CAUSE SERIOUS INJURY AND WILL VOID MACHINE WARRANTY ...
Страница 3: ...of a gap will allow work pieces and fingers to get pinched CAUTION DO NOT WEAR GLOVES LOOSE CLOTHER AND ALWAYS TIE BACK HAIR MAINTENANCE keep machine clean Flip and or rotate platen when necessary Never sand in one area so the platen will wear evenly No grease is required All bearings are sealed for the life of the bearing Clean dust collector and sander at the end of every shift COOLANT TANK Clea...
Страница 4: ...LE IDLER FOR S4 S460 SANDERS 1 32 560 006 IDLER PULLEY S4 W BEARINGS FOR S4S AND S460 1 33 123 003 COLLAR FOR S4 1 34 EERR0 5 EERR1 2 1 2 E RETAINING RING 1 35 SSKA010004 10 24 X 1 4 SOC SET KNURL PT 2 36 455 003 TENSION RELEASE LEVER FOR S6 SANDER HEADS 1 37 HHT5031032 5 16 18x2 HEX HEAD TAP BOLT GR5 ZINC 1 38 BWWA031 5 16 BOWED SPRING WASHER 21 64 1 39 STNZ031 5 16 18 STOVER LOCK NUT ZINC WAX 1 ...
