ELECTRICAL CONNECTIONS
WARNING: THIS MACHINE MUST BE EARTHED.
This product is provided with a standard 13 amp, 230 volt (50Hz), BS 1363 plug, for
connection to a standard, domestic electrical supply.
Should the plug need changing at any time, ensure that a plug of identical
specification is used. IMPORTANT: The wires in the mains lead should be wired up
in accordance with the following colour code:
Green & Yellow
—-
Earth
Blue
—-
Neutral
Brown
—-
Live
As the colours of the wires in the mains lead may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
Connect GREEN & YELLOW coloured cord to plug terminal marked
with a letter “E” or Earth symbol “ “.
Connect BROWN coloured cord to plug terminal marked letter “L”
Connect BLUE coloured cord to plug terminal marked letter “N”
We strongly recommend that this machine is connected to the mains supply
through a Residual Current Device (RCD).
FUSE RATING
The fuse in the plug for this appliance must be rated at
13 amps
IMPORTANT:
If this appliance is fitted with a plug which is moulded onto the electric cable (i.e.
non-rewirable) :
1.
The plug must be thrown away if it is cut from the electric cable. There is a
danger of electric shock if it is subsequently inserted into a live socket outlet.
2.
Never use the plug without the fuse cover fitted.
3.
Should you wish to replace a detachable fuse carrier, ensure that the correct
replacement is used (as indicated by marking or colour code).
4.
Replacement fuse covers can be obtained from your local dealer or most
electrical stockists.
5.
The fuse in the plug must be replaced with one of the same rating (
13 amps
)
and this replacement must be approved to BS1362.
EXTENSION CABLES
If an extension cable is used, always ensure it is fully unwound. When used
outdoors, ensure the extension cable is specifically designed for outdoor use.
The maximum extension length is 25 metres. Ensure that the wire sizes in the cable
is at least 1.5mm
2
in cross section. As a general rule, the extension cable must be
thicker than the cable supplied with the washer.
IF IN DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
Do not attempt any electrical repairs yourself.
4
