11
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
OPERATION
1. The pressure washer should always be located on a firm level surface
where it is not exposed to extreme weather conditions such as strong wind,
freezing or rain.
2. It is recommended that where possible a partition be erected between the
wash area and the pressure washer to prevent accidental spraying of the
pressure washer. Moisture entering the machine may cause damage.
CONTROL PANEL
l
WARNING: DO NOT OPERATE THE PRESSURE WASHER INDOORS, OR IN
ENCLOSED AREAS WITHOUT ADEQUATE VENTILATION, OR IN AREAS
WHERE FLAMMABLE VAPOURS (PETROL, SOLVENTS ETC.) MAY BE PRESENT.
WARNING: IF THE PRESSURE WASHER IS TO BE USED IN AN ENCLOSED
AREA THE BURNER EXHAUST MUST BE VENTED TO THE OUTSIDE
ATMOSPHERE. THE USE OF A DRAFT REGULATOR IS RECOMMENDED. ALL
VENTING MUST BE IN ACCORDANCE WITH APPLICABLE LAWS AND LOCAL
ORDINANCES FOR SUCH INSTALLATIONS.
A
Pressure Gauge
Displays hot water temperature
B
Temperature regulator
(from 30°C to 150 °C.)
Selects water temperature.
C
ON/OFF Switch
Turns machine On/Off.
Содержание HLS130
Страница 32: ......
