Clarke ErgoEX DLX-230V, Руководство оператора, Страница: 12 / 57

CLARKE TECHNOLOGY Image 16 230V Operator's Manual Page 11
Introduction and Machine Specification
The Image 16 is an extractor for cleaning the carpet. The machine applies cleaning solution to the carpet and
removes dirty solution and soil from the carpet. The Image 16 is equipped with a power brush. The extractor has
controls to start the solution pump, and vacuum motor. The extractor (floor spray and brush) can be operated
intermittently or continuously. This machine is intended for commercial use.
NOTE : When using the extractor to clean carpets, follow this procedure:
1. Do not walk on freshly cleaned carpets for at least four hours or until the carpet is dry to touch.
2. If aluminum or plastic pieces have been placed under the legs of furniture, do not remove them until
the carpet is dry.
3. Do not allow children or pets to crawl or walk around on the damp carpet.
4. Vacuum right after the carpet is dry and then vacuum the carpet once a week, or as often as needed.
Specifications:
Image 16i Image 16ix
Model STD-230V DLX-230V
Code Number 04112B 04113B
Solution Pump (bar) 6.8 Fixed 0-6.8 variable
Solution Tank Capacity (l) 30.2 32.1
Recovery Tank (l) 28.3 28.3
Waterlift (m) 2.9
Vacuum (W)
1,200Tangential discharge 1,200 Tangential discharge
Electrical 230 Volt 50/60 Hz 230 Volt 50/60 Hz
Power Cable 11m 3-wire 23m 3-wire
Spray Jets Q. C. (5) 4 front, 1 rear
Brush Size (cm) 7.6 x 33 7.6 x 33
Brush Motor Size (W) 90 90
Dimensions (cm) 84 x 117 x 41 84 x 117 x 41
Weight (kg) 44.5 44.5
Shipping WeightZ (kg) 52 52
Sound Level (dBA) 80 80
Vibration (m/s/s) <2.5 <2.5
2.9