manualshive.com logo in svg

Clarke CMS250S, Инструкция по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Clarke CMS250S Скачать руководство пользователя страница 14

14

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

OPERATION

Always observe the safety instructions and applicable regulations.

BODY AND HAND POSITION

Proper positioning of your body and hands when operating the saw will make 
cutting easier and safer.

•

Never place your hands near the cutting area or blade.

•

Hold the workpiece tightly to the table and the fence when cutting.

•

Keep your hands in position until the trigger switch has been released and 
the blade has completely stopped.

•

Always make dry runs (without power) before cutting so that you can 
check the path of the blade.

•

Do not cross your hands.

SWITCHING ON AND OFF

1. To start the saw, squeeze the 

trigger switch.

•

Allow the motor to reach full 
speed before cutting.

2. To stop the saw, release the 

trigger switch.

NOTE: 

Before beginning any cuts, ensure that the fence assembly is 

positioned centrally and will not be struck by the saw blade.

WARNING: THE BLADE WILL CONTINUE TO ROTATE AFTER THE SWITCH HAS 
BEEN RELEASED.

Содержание CMS250S





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды