14
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
MAINTENANCE
Before starting any cleaning or maintenance, always ensure the tool is
isolated from the electrical supply by switching off and removing the plug
from the power socket.
CLEANING
1. Ensure all air ventilation slots are clear,
2. Clean the exterior of the tool with a soft cleaning cloth. Never use any
chemicals or harsh abrasives. Avoid using solvents when cleaning plastic
parts, which may be susceptible to damage from various types of
commercial solvents.
GENERAL MAINTENANCE
• All bearings etc, in this tool are lubricated with a sufficient amount of
high grade lubricant for the tools lifetime under normal operating
conditions, therefore no further lubrication is necessary.
• The carbon brushes in the tool will eventually wear down to such an
extent that sparks will be noticed inside the tool and its performance
will deteriorate. Brushes are a consumable spare which should be
replaced by your Clarke dealer or power tool repairer.
• Refer to your CLARKE dealer if internal maintenance is required.
SPECIFICATIONS
Battery Type/Voltage
Li-Ion 10.8 VDC
No-load speed
5000-16000 Oscillations /Minute:
Weight (without battery pack)
0.896 kg
Dimensions (without battery pack) (L x W x H) 270 x 130 x 200 mm
Sound Power Level (LWA)
87 dB(A)
Sound pressure Level (LPA)
76 dB(A)
Sound Uncertainty Value (K)
3 dB(A)
Vibration
2.39 m/s² (Uncertainty Value (K) 1.5 m/s²)
Battery Charger Voltage
230 VAC (50Hz)
Battery Charger Output Current
500 mA
Battery Charger Output Voltage
12 V
Содержание CMFTLi
Страница 16: ......
