10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
OPERATION
1. Hold the tool tightly and move the
On/Off switch forward.
• The motor will then run
continuously.
2. Adjust the speed control shown to
the required setting (1-6).
3. Slowly apply the tool to the work
piece and continue to sand or
cut. Apply light pressure as you
move it across the work.
4. Slide the switch back and the
motor will stop.
WARNING: ENSURE THAT THE WORKING POSITION ADOPTED DOES NOT
CAUSE OPERATOR FATIGUE WHICH MAY LEAD TO LOSS OF CONTROL.
Содержание CMFTLi
Страница 16: ......
