Clarke CBS225, Инструкция по эксплуатации и техническому обслуживанию

Страница: 6 / 28

6
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
5. Never use damaged blades. (Replacement blades are available from your
Clarke dealer.
6. Never attempt any maintenance or adjustments of the saw band when it is
in motion.
7. Do not remove jammed cut -off pieces until the blade has stopped.
8. Replace table insert if the slot has become enlarged.
9. When cutting wood, ensure all nails or fastenings have been removed
beforehand. Nails will damage the saw blade.
10. When cutting round timber stock, use a suitable jig or fixture to keep the
work from turning.
11. Always ensure the blade is fully tightened and correctly adjusted before
use.
12. Keep the mains cable well away from the working parts of the machine
and ensure an adequate electrical supply is close at hand so that the
operation is not restricted by the length of the cable.
13. Switch the machine off as soon as the task is completed.
SAFETY SYMBOLS
The following safety symbols may be found on the machine.
Wear a dust mask
Wear eye protection
Read instruction manual before use