12
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
8. Fit the rip fence to the table if
required.
9. Slide the mitre gauge into the slot
in the table if required.
ADJUSTING THE COMPONENTS
TILTING THE TABLE
1. Loosen the locking handle and
turn the table tilting knob to adjust
the table to the desired angle.
2. Use the angle indicator scale on
the table tilting bracket, to find
the desired angle.
3. Re-tighten the locking handle to
secure the table.
•
For assured accuracy, we
recommend checking the tilt
angle using a protractor or set square.
4. With the table exactly level, it
should rest on the supporting bolt
shown. Adjust the height of the
bolt by screwing it in or out of the
table and securing with the
locknut. Check with a set square
that the table is exactly level
when resting on the bolt.
Содержание CBS225
Страница 1: ...OPERATION MAINTENANCE INSTRUCTIONS GC0816 9 BANDSAW MODEL NO CBS225 PART NO 6460133...
Страница 28: ......
