21
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
8. Set the blade tracking as described on page 13.
9. Close the upper & lower covers.
10. Adjust the blade tension as described on page 13.
11. Adjust the upper and lower blade guide as described on pages 13/14.
CHANGING THE WHEEL PULLEY TYRES
Eventually the rubber tyres on the bandsaw pulley wheels may wear due to
the constant contact with the blade. Remove the saw blade as described on
page 20, then lift the edge of the tyre with a small screwdriver and carefully
work off the wheel. Ease on the new tyre, ensuring it sits evenly around the
wheel.
We recommend that both tyres
are changed at the same time.
BLADE GUIDES
Blade guides should be inspected regularly for wear or chipping, and
replaced if necessary. See page 14 for blade guide adjustments.
BEARINGS
All bearings used in the construction of your bandsaw and its motor are sealed
and lubricated for life.
STORAGE
Switch off the bandsaw and disconnect the power cable.
Cover the machine with a plastic bag and store it in a dry location.
OPTIONAL ACCESSORIES
REPLACEMENT BLADES
Suitable blades are available from your Clarke stockist:
•
6tpi Bandsaw blade: Part No6458005
•
10tpi Bandsaw blade: Part No6458000
DUST EXTRACTORS
A choice of dust extractors is available for this bandsaaw including
CDE35 Portable Dust Extractor & Chip Collector
CDE1000 Portable Dust Extractor
Содержание CBS225
Страница 1: ...OPERATION MAINTENANCE INSTRUCTIONS GC0816 9 BANDSAW MODEL NO CBS225 PART NO 6460133...
Страница 28: ......
