Clarke 7330347 Скачать руководство пользователя страница 3

3

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

GENERAL SAFETY RULES

1.

DO NOT

 point the spray at other people, animals, electrical equipment or 

the machine itself.

2.

DO NOT 

hold your finger over the high pressure nozzle.

3.

DO NOT

 let children or untrained personnel use this machine.

4.

DO NOT 

operate the machine with any of the covers removed.

5.

DO NOT 

try to repair this machine. Always refer to your CLARKE service 

department for all repairs.

6.

DO NOT 

supply any liquid other than water to the water inlet.

7.

DO NOT 

use the detergent pickup facility to introduce flammable liquids/

solvents, e.g. paint thinners, petrol, oil as there is a risk of explosion.

8.

ALWAYS

 release the remaining pressure in the system; turn off the water 

supply and operate the trigger before you remove hoses or accessories. 

9.

ALWAYS

 keep the machine dry and away from the water spray.

10.

ALWAYS

 use protective clothing and safety glasses. Loose particles and 

other items can be propelled at high speed by the water spray.

11.

ALWAYS

 hold the gun securely & expect it to ‘kick’ when you pull the trigger.

12.

ALWAYS

 respect the requirements of the local water company. Pressure 

washers may only be connected to the mains water supply if a system 
separator (also known as a backflow preventer) is installed in the supply 
hose.

13.

ALWAYS

 disconnect from the water supply, and make sure that you drain 

the system when not in use. Keep in a cool dry location.

14.

ONLY

 use detergents that are suitable for pressure washers, we recommend 

that you use CLARKE Traffic Film Remover or CLARKE Wash and Wax 
(available from your dealer). 

15.

WARNING

 High pressure water jets can be dangerous, the jet must not be 

directed at a person or anything that they are wearing.

16.

WARNING

 High pressure hoses, fittings and couplings are important for the 

safety of the machine. Use only hoses, fittings and couplings recommended 
by the manufacturer.

17.

WARNING

 Water that passes through a system separator (also known as a 

backflow preventer) is not safe to drink.

18.

DO NOT 

use the pressure washer if there is damage to the inlet/outlet hose 

or the machine.

WARNING: WATER AT HIGH PRESSURE CAN BE DANGEROUS AND CAN 
CAUSE DAMAGE TO PERSONS OR PROPERTY IF THE OPERATOR IS 
CARELESS. NEVER ALLOW ANYONE TO OPERATE THIS EQUIPMENT UNLESS 
THEY ARE THOROUGHLY RELIABLE, AND FAMILIAR WITH THE SAFETY 
PRECAUTIONS.

Содержание 7330347

































Отзывы: