10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
LANCE STORAGE BRACKET
1. Fit the bracket into the position
shown and secure using the
washers and nuts supplied.
HOSE STORAGE BRACKET
1. Screw a nut and washer onto
each leg of the hose bracket as
shown.
NOTE:
You will need 4 x nuts &
washers. 2 sets for securing on
the top and 2 sets for securing
on the bottom.
2. Fit the hose bracket in place on
the rear of the washer as shown
and secure from underneath
using a nut and washer.
REMOVE THE TRAVEL PLUG BEFORE USE.
1. Use a 17mm spanner to remove
the red travel plug.
2. Inside the small bag attached is
an oil breather plug which needs
to be fitted in its place.
• The oil breather plug must only
be inserted hand tight.