9
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
DISPLAY & CONTROL PANEL
DISPLAY BUTTON
Press the DISPLAY button until the following LED is lit:
1.
VOLTAGE
(V) - When the charger is NOT charging a battery, the digital
display will show the battery voltage.
2.
BATTERY
(%) - When in charging, the digital display shows an estimated
charge percentage of the battery connected to the charger s battery
clamps.
3.
ALTERNATOR
(%) - The digital display shows an estimated output
percentage of the vehicle’s charging system connected to the chargers’s
battery clamps, compared to a properly functioning system.
BATTERY TYPE, RATE SELECTION & FUNCTION BUTTONS
1. Press the
BATTERY TYPE
button to choose the type of battery to be charged:
STD, GEL or AGM
2. Press the
RATE SELECTION
button to choose the charging current required:
10A, 20A, 35A or 50A.
3. Then press the
FUNCTION
button until the
CHARGING
LED is lit (digital
display will show CHARGE-ON).
When in charging mode, pressing the
BATTERY TYPE
button will not work. To stop
charging, press
FUNCTION
button again and
CHARGING
LED will turn off (digital
display will show
CHARGE-OFF
)
Содержание 6261525
Страница 24: ......
