13
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
STARTING A CAR - BOOST
The battery charger can be used to start a car if the battery is low. Follow all
safety instructions and precautions for charging your battery. Wear eye
protection and protective clothing. The procedures are as follows:
1. Connect the charger to the battery following the instructions given on
page 10.
2. Press the
FUNCTION
button until the
START LED
is lit.
3. Turn on the vehicles ignition until it starts or 3 seconds have passed. If the
engine does not start, wait 4 minutes before trying again. This allows the
charger and battery to cool down.
4. If the engine fails to start, use the
CHARGE
maximum rate (50A) to charge
for some minutes before trying to attempt to start the engine again.
5. After the engine has started, disconnecting the battery charger clamps
from the battery/vehicle.
During the starting sequences listed above, the charger is set to one of three
states:
1.
START-READY
: The charger waits until the engines ignition is activated
before delivering the amps for the engine start.
2.
CRANKING
: When the ignition is detected, the charger will automatically
deliver up to its maximum output as required by the starting system for up
to 5 seconds.
3.
COOL DOWN
: After ignition, the charger enters a mandatory 240 seconds
cool down state (Pressing any button will not work). The digital display
indicates the remaining cool down time in seconds. It starts at 240 and
counts down to 0. After 240 seconds, the digital display will change from
displaying the countdown to displaying
START-READY
.
WARNING: USING THE ENGINE START FEATURE WITHOUT A BATTERY
INSTALLED IN THE VEHICLE WILL DAMAGE THE VEHICLES ELECTRICAL
SYSTEM.
Содержание 6261525
Страница 24: ......
