20
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ERROR MESSAGES
1. E01 D
ERROR LED
lit: Reverse connection
2. E02 D
ERROR LED
lit: Temperature in charger is too high
3. E03 D
ERROR LED
lit: The battery cannot store electric charge (dead
battery)
4. E04 D
ERROR LED
lit: No battery connected/battery voltage is lower
than 1 volt (dead battery)
5.
REPAIR-ON
dis
REPAIR LED
flashing: Charger automatically enters
repairing mode
6.
REPAIR-ON
dis
REPAIR LED
solid lit: Manually choose repairing
mode
TROUBLESHOOTING
Problem
Cause
Solution
Battery
does not
charge
Lack of AC input
power.
Make sure that the electrical circuit the
charger is on has power.
Faulty connections to
battery terminals.
Check the battery connections; ensure
that there is a good connection at the
battery terminal/post and/or vehicle
chassis.
Wrong charge
voltage selection.
Check that the correct charge voltage
was selected for the battery being
charged.
Battery voltage too
low.
Ensure enough charging time was
allowed to charge battery.
Charging a very cold
battery.
If the battery being charged is extremely
cold (below freezing), it will not accept a
high rate of charge, so the initial charge
rate will be slow.
The rate of charge will increase as the
battery warms.
NEVER
attempt to charge a frozen
battery.
Содержание 6261525
Страница 24: ......
