Clarke 3402120, Инструкция по эксплуатации и обслуживанию

Страница: 9 / 24

9
PREPARING FOR USE
Oil
IMPORTANT:
THE ENGINE FITTED TO THIS LAWNMOWER IS SUPPLIED WITHOUT OIL DURING
SHIPMENT.
ENSURE THE ENGINE IS FILLED WITH THE CORRECT AMOUNT OF A SUITABLE OIL
AS DESCRIBED ON PAGE 8 OF THE MANUAL BEFORE STARTING THE ENGINE.
Serious damage may result if the engine is run without oil.
1. To fill with oil, remove the oil filler cap and fill to the MAX mark on the dipstick, using a good
quality SAE30, 4-stroke oil (not supplied), available from your CLARKE dealer.
2. Change the oil after the first five hours operation of a new mower (see Maintenance), and
thereafter every 25 working hours.
3. Always change the oil while the engine is warm - but not hot - never attempt any
maintenance on a hot engine.
4. To check the oil level, always clean around the dipstick before unscrewing it. Once removed,
wipe it with a clean cloth then replace, screwing down fully. Remove once more and check
the level.
5. Get into the habit of checking the oil level before each use.
Petrol
1. Fill the fuel tank with regular grade unleaded petrol.
2. DO NOT fill the fuel tank when the engine is hot.
3. DO NOT fill the fuel tank whilst smoking.
4. DO NOT remove the fuel filler cap whilst the engine is hot or running. ALWAYS allow the
engine to cool for at least 2 minutes before refuelling.
5. To avoid introducing dirt into the fuel system, wipe all grass and dirt from the petrol filler cap
before unscrewing it.
6. It is recommended that you fill the tank through a funnel with a filter.
7. Wipe away spillages before starting.
8. Use fresh petrol....stale fuel can cause the carburettor to clog up.
9. DO NOT refuel indoors or in an unventilated area.
10. DO NOT operate engine if petrol has been spilled. Move lawn mower well away from the
scene before starting.