Clarke 3402120, Инструкция по эксплуатации и обслуживанию

Страница: 7 / 24

7
ASSEMBLY
Upper & Lower Handles & Starter Pull Cord
1. Insert lower handle bars into holes provided in the lawnmower body (model CLM16).
2. Push the handle firmly down until they locate securely into the holes, (Fig. 2a)...push home
firmly and secure with screws (model CLM16).
3 In the case of the CLM20SP, attach the lower handlebars to the frame brackets with the four
M8 x 25 bolts & nuts provided as in Fig 2b.
4. The upper handlebar should then be fixed to the lower handlebars using the bolts and plastic
bodied wingnuts provided (Fig.2c).
Locate the pull cord attachment ring onto the right
hand arm connecting bolt. Secure it in place with the
plastic wing nut as in Fig.3.
Pull the starter ‘Pull Cord, until you can locate it in
the pull cord attachment ring on the handlebar
where it is ready to use.
Fig. 2b
Fig. 3
Fig. 2a
Fig. 2c