Clarke 3402120, Инструкция по эксплуатации и обслуживанию

Страница: 11 / 24

11
Using the Mower
Do not overload your lawnmower. Correct height adjustment (see below), will help reduce motor
overload and will help prevent damage to your lawnmower.
1. Both the CLM16 and CLM20SP are fitted
with a single cut height adjustment lever
which adjusts the height on all four wheels.
The height of cut is altered by pulling the
adjustment lever away from the location
slots and moving to the selected position.
2. When mowing long thick grass, set the
cutting height to its highest setting and
lower with each successive cut.
3. Start mowing from the outside edge of the
lawn, mowing in strips in alternate
directions, overlapping slightly.
4. Mow twice a week in the growing season,
your lawn will suffer if more than one third
of its length is cut at one time and this may
also result in poor grass collection.
5. ALWAYS make sure the lawn is clear of debris which could be thrown up by the blade.
6. Before use always visually inspect to see that blades are not worn or damaged. Replace
worn or damaged blades before mowing.
Safe Maintenance and Storage
1. Always disconnect the spark plug before attempting any maintenance, cleaning or
adjustment.
2. Ensure all nuts, bolts and screws remain tight to ensure the lawn mower is in safe working
condition.
3. Check the grass collection box frequently for damage.
4. Replace worn or damaged parts. (consult your CLARKE dealer)
5. Only use the replacement blade, blade bolt, and spacer specified for this product (consult
your CLARKE dealer).
6. Never store the lawnmower with fuel in the tank inside a building where fumes can reach an
open flame or spark.
7. Allow the engine to cool before storing the mower in a small enclosure.
8. To reduce fire hazard, keep the engine assembly and fuel storage area free of grass, leaves
or excessive grease.
9. If the fuel tank has to be drained, this should be done outdoors.
10. Be careful of the sharp cutting blade during maintenance work.
Fig. 7