Clarke 3402120, Инструкция по эксплуатации и обслуживанию

Страница: 8 / 24

8
Installing the Grass Collection Box
1. To attach the grass collection box, lift the guard flap (Figs 4a & 4b) and make sure the
discharge chute is clean and free from debris.
2. Fig 4a shows the CLM16 grass collection box which has a front bar which rests on two
location points on the lawnmower. The CLM20 design employs a slightly different attachment
method shown in Fig 4b, using two hooks on the grass collection box to engage with a rod
on the lawnmower body.
3. Locate the grass collection box onto the location points at the rear of the mower and rest the
guard flap onto the top of the grass collection box. Ensure the grass collection box is
securely located (Fig 4c).
4. Removal is the reverse procedure.
5. Assembly is now complete, but before using the lawnmower, certain important checks MUST
be made which are described in the following pages.
NOTE
Where grass collection is not required you can use the lawn mower without the grass box, but
you MUST ENSURE THE GUARD FLAP IS FULLY CLOSED.
Fig. 4b
Fig. 4a
Fig. 4c