Clarion FZ259, Руководство пользователя и инструкция по установке

Страница: 8 / 27

FZ259 8
English
7. TROUBLESHOOTING
Unit cannot
power on.
No/low audio
output.
Poor sound
quality or
distortion.
Unit resets itself
when engine is off. Incorrect connection between
ACC and Battery.
Speaker power rating does
not match unit.
Wrong connections.
Speaker is shorted.
Check the wiring and correct.
Replace speakers.
Check wiring and correct.
Check wiring and correct.
GENERAL
Unit fuse blown.
Improper audio output connection.
Volume set too low.
Speakers damaged.
Heavily biased volume balance.
Speaker wiring is in contact
with metal part of car.
Car battery fuse blown.
Replace with new fuse of correct rating.
Check wiring and correct.
Increase volume level.
Replace with new fuse of correct rating.
Replace speakers.
Adjust the channel balance to center position.
Insulate all speaker wiring connections.
Problem Cause Measure
Problem Cause Measure
USB device cannot
be inserted.
USB device is not
recognized.
No sound heard with
the display “No File”
shown.
Sound skips or is
noisy.
The USB device is damaged.
No MP3/WMA file is stored in
the USB device.
MP3/WMA files are not
encoded properly.
The USB device has been
inserted with wrong direction.
The USB connector is broken.
Reversing the connection direction of the USB
device, try it again.
Replace with a new USB device.
USB
Disconnect the USB device and reconnect. If
the device is still not recognized, try replacing
with a different USB device.
Store these files properly in the USB device.
Use MP3/WMA files encoded properly.
Connectors are loose.
Problem Cause Measure
Cannot pair the
Bluetooth enabled
device with the
audio system.
The audio quality is
poor after connection
with a Bluetooth-
enabled device.
The Bluetooth reception is poor.
The device does not support the
profiles required for the system.
The Bluetooth function of the
device is not enabled.
Use another device to connect.
Refer to the user manual of the device for how
to enable the function.
Bluetooth
Move the device closer to the audio system or
remove any obstacle between the device and
the system.
8. SPECIFICATIONS
FM Tuner
Power Output :
14W × 4 Channels at 4 Ω
and 1% THD+N
Signal to Noise Ratio :
60dB ( reference : LPF 1 W into 4 )
Frequency Range : 87.5 - 107.9MHz
Usable Sensitivity : Less than 10 dB at S / N 30 dB
Stereo Separation : >30 dB(1kHz)
AM Tuner
Frequency Range : 530 -1710KHz
Usable Sensitivity : Less than 40 dB
USB
MP3/WMA mode
USB Host: Host 1.1 compatibles 2.0
MP3 sampling rate: 32kHz, 44.1kHz, 48kHz
MP3 bit rate: 8~320kbps and varibale bit
rate
WMA bit rate: 8~320kbps
Logical format: ISO9660, Joliet
Number of file: Maximum 999
Max directory 10
depth:
Sorting Method: Tree sorting
Max File/Directory 64Byte
Name:
ID3 tag: V2.0 or later General
Power Supply Voltage : 24V DC ( 21 to 32V),
Negative Ground
Fuse: 15A
Speaker
Impedance : 4-8 ohms per channel
Note : Specifications and design are subject to
change without notice for further improvement.
Signal/noise ratio : > 5 5 dB
Power output : 45W x 4 channels
Aux - in level : ≥ 650 mV
Bluetooth
Specification: Bluetooth Version. 2.0+ EDR
(Enhanced Data Rate)
Supported Profiles:
A2DP
(Advanced Audio
Distribution Profile)
AVRCP 1.4 (Audio/Video
Remote Control Profile)
SSP (Simple Secure Pairing)
Send/Receive Sensitivity: Class 2
Bluetooth module
Model: CW51_P
Brand: Coordwise Technology Corp
Maximum memory capacity: 32GB
Playable folders: up to 99
Playable files: up to 5000