clare HAL101, Руководство по эксплуатации

Страница: 94 / 104

Your Hipot tester
86
Digit 3 – Start Conditions & Base Target Voltage
Digit 3 is a combination of the start conditions for the test and the base
target voltage (to which the value encoded in digit 4 is added).
Digit 3
Base Target Voltage
Start Conditions
0.0kV 1.6kV 3.2kV 4.8kV
Reset Ext . Guard Switch, opened
then closed followed by Green
(START) button to start test and
each repeat of test. (All loops)
‘0’ ‘7’ ‘E’ ‘L’
Reset Ext . Guard Switch, opened
then closed followed by Green
(START) button to start 1
st
test.
Repeat test loops will convene
whilst Guard switch is closed.
‘1’ ‘8’ ‘F’ ‘M’
Reset Ext . Guard Switch, opened
then closed to start test and each
repeat of test. (All loops)
‘2’ ‘9’ ‘G’ ‘N’
Reset Ext . Guard Switch, opened
then closed to start 1
st
test.
Repeat test loops will convene
whilst Guard switch is closed.
‘3’ ‘A’ ‘H’ ‘O’
Press Green (START) Button to
start test and each repeat of test.
Guard switch must be closed
throughout the tests. (All loops)
‘4’ ‘B’ ‘I’ ‘P’
Press Green (START) Button to
start 1
st
test. Repeat test loops will
follow. Guard switch must be
closed throughout any tests.
‘5’ ‘C’ ‘J’ ‘Q’
None . Test starts without any
activity on Ext. Guard switch or
Green button. Guard switch must
be closed throughout any tests.
‘6’ ‘D’ ‘K’ ‘R’