claber 8488 Dual Select, Быстрый старт

Страница: 8 / 76

US
fig.2
The timer requires 2 AA 1.5V (LR6) alkaline batteries, which normally will
be sufficient for an entire dry season (assuming an average of 3 watering
cycles per day).
To install or replace the batteries, proceed as follows (fig.2):
• Firmly press the tab located at the bottom of the timer (
➊
) and at
the same time pull back (
➋
).
• Remove dead batteries, if in place.
• Fit the new batteries in the holder, observing the correct polarity
(
➌
).
• Refit the front part of the timer to the back from top to bottom, mak-
ing sure that the locking tab clicks into place.
1
+
AA
+
AA
3
2
1,5 V
AA
Alkaline
2
Batteries installation
6