claber 8488 Dual Select, Быстрый старт, Страница: 17 / 76

US
Programming
maNUaL watERINg
1.
Press the “a-StaRt” and “B-StaRt” buttons simultaneously and
hold them for at least 3 seconds -> when the timer goes into manual
mode, the word
oFF
will blink.
2.
To activate line A, press the
“a - StaRt”
button -> the line will
be activated for 5 minutes (which can not be modified by the user),
confirmed by the
symbol. To stop watering within the 5
minutes, press
“a-StaRt”
a second time.
3.
To exit the manual function, make sure that both valves are off, then
press the
“a-StaRt”
and
“B-StaRt”
buttons and hold them for at
least 3 seconds.
• When in manual mode, the watering cycle in progress will be
suspended but the program itself will not be cancelled or changed.
• In “manual watering” mode, the two lines can be also
activated simultaneously.
RESEt
The factory settings of the timer can be restored at any given moment
by pressing the
“a-StaRt”
and
“B-StaRt”
buttons simultaneously and
holding them for at least 10 seconds.
ShUttINg oFF thE tImER
If the timer needs to be switched off at any point in time, press the
“F”
button until the word
“oFF”
appears, then press
“a - StaRt”
.
Repeat the procedure for line B.
15