CKD GPS3 Series, Инструкция по эксплуатации

Страница: 28 / 40

５．MAINTENANCE
５．１ Periodic inspection
(1) Daily inspection
・Before operating the product, confirm proper operation.
・Before using this product, it is operating correctly, please perform the operation confirmation.
(2） Periodic inspection
・To operate the product in its optimal operating state, carry out the periodic inspection
normally once every six months.
・Check that no leak occurs in the piping.
５．２ Disassembly and reassembly
a） Before disassembling or cleaning the orifice,turn the power OFF, stop the supply
of compressed air and make sure that there is no residual pressure.
b） Do not disassembly the product as it will affect performance.
Read instructions and precautions enclosed with the product before starting use
or disassembly.
５．２．１ Orifice cleaning
It is possible to clean foreign matter accumulated in the internal orifice.
■ Disassembly procedure
1) Please remove the pin from the product body with a thin tool such as a flathead screwdriver.
2) Pull the cartridge fitting and pull it out from the product body.
Pin
Cartridge fitting
CAUTION
WARNING
MAINTENANCE
５
− 27 − [SM-P00143-A]