CKD GPS3 Series, Инструкция по эксплуатации

Страница: 18 / 40

４．５ ES mode
● Sets the threshold and hysteresis.
Regular operation is halted when entering ES mode.
Note) Outputs retain their status as of when the mode was entered.
(1) ES mode list
(2) Moving to ES mode
Press and hold SET (2 seconds or more) to move from the normal screen to ES mode.
After moving to ES mode, use △ or ▽ to switch among setting items.
(3) Returning to the normal screen
Press and hold SET (2 seconds or more) to move to RUN mode.
４．５．１ CH1 threshold setting （Factory default: 50）
CH1 threshold should be set to no display or to a value in the table below.
４．５．２ Setting CH1 hysteresis （Factory default: 10）
CH1 hysteresis can be set from 1 to 20.
OPERATION
４
− 17 − [SM-P00143-A]