CKD GPS3 Series, Инструкция по эксплуатации

Страница: 19 / 40

４．５．３ CH2 threshold setting （Factory default: 50）
CH2 threshold should be set to no display or to a value in the table below.
４．５．４ Setting CH2 hysteresis （Factory default: 10）
CH2 hysteresis can be set from 1 to 20.
４．６ OS mode
● Sets other settings.
Regular operation is halted when entering OS mode.
Note) Outputs retain their status as of when the mode was entered.
(1) OS mode list
(2) Moving to OS mode
Press and hold SET (4 seconds or more) to move from the normal screen to OS mode.
After moving to OS mode, use △ or ▽ to switch among setting items.
(3) Returning to the normal screen
Press and hold SET (2 seconds or more) to move to RUN mode.
OPERATION
４
[SM-P00143-A] − 18 −