Installation details
Aquafil® Hydrobank Triple
Step 1.
Remove the top and bottom panels by unscrewing all M6 screws and M5 screws for the hinges.
When removing the Top Panel disconnect hoses from the bottle refill nozzles.
Step 2.
Screw a timber support to the wall. This will assist you in resting the Hydrobank unit while you
mark out the holes for the mounting screws. Make sure the timber is level.
See Step 3 for heights of timber.
Pushing tube in before
pulling it out helps to
release tube
Push in collet
to release tube
Tube is secured
in position
Simply push in
tube to attach
Installation Details
top panel
Issued: April 2021
