Step 5.
Remove timber support after the unit is fixed to the wall.
NOTE: - Minimum fixings to the top wall is 4 bolts at the top module ( 1 bolt per bracket)
- Minimum fixings to the wall is 8 bolts at the bottom module ( 2 bolts per bracket)
Bottom brackets
Top
module
Bottom
module
Remove timber support after unit is fixed
to the wall.
Top brackets
Step 6.
For chiller option: Place the chiller at approximately 50° angle then pull bottom forward and
push top back as shown by the arrows, until unit is upright.
NOTE: For water connection details please see chiller installations for more details
Bring the chiller forward against
the inside lip
Issued: April 2021
