18 - ENG
ENGLISH
3.4 System Setting
3.4.10 Receiver Lock
If you select “
On
”, you will have to enter the PIN code every time you
start the receiver from standby.
3.4.11 Menu Lock
If the Menu Lock is already set, the PIN code is needed to set the Edit
Channel List and System Setting.
If you want to set the Menu Lock, press the
UP/DOWN
buttons to select
Locked and then press the
OK
button.
3.4.12 SPDIF Output
You can hear digital audio of the Dolby 5.1 channel using S/PDIF
Output.
• If selecting OFF, the digital audio will not be output.
• When selecting PCM, the unzipped digital audio is output through
S/PDIF.
• When selecting Dolby Digital, if the current channel is a Dolby audio
channel, the zipped Dolby stream is output through S/PDIF.
3.4.13 Factory Reset
Press the
UP/DOWN
button on the Setup list to select Factory Reset.
Use this option only if you have to start the complete installation
procedure from scratch. If you continue from here, all your previous
settings and all channels will be cleared! The default data will be loaded.
If you press the
OK
button, it asks for your confirmation.
If you want to reset, press the
OK
button, or press the
EXIT
button to
exit this menu.
3.4.14 System Information
Displays the system information: MODEL name, Last Update, S/W, H/W,
Loader version, C.A
Press the
UP/DOWN
button on the Setup list to select System
Information and then press the
OK
button.
STB_CityCom_Sat_111379_CCR545_Eng.indd 18
2010-08-03 �� 8:27:00
