CityCom CCR545, Руководство пользователя

Страница: 17 / 24

ENG - 17
ENGLISH
3.4 System Setting
3.4.4 SD Video Output
This menu is used for viewing screen.
• If the receiver and TV are connected using the composite cable,
select CVBS using the
UP/DOWN
buttons.
• If the receiver and TV are connected using the Scart cable, select
SCART-RGB using the UP/DOWN buttons.
3.4.5 Screen Type
Select the TV setting type.
• Press the LEFT/RIGHT buttons to select either 4:3 TV or 16:9 TV .
• Press the UP/DOWN buttons to select either Letter Box , Cinema , or
Full
.
3.4.6 Banner Time
When you switch channels, an information banner will be shown for
a few seconds.
You can select for how long the banner will be shown.
• Select the banner time you want and then press the
OK
button.
• Each selectable time items has meaning of the interval time during
a channel banner stays on changed channel screens.
The time ranges 1, 3, 6, 9 12, and 15 seconds.
3.4.7 Local Time
Select the time setting type.
• Press the
LEFT/RIGHT
button to select the current time zone from
standard time and then press the OK button. When you press the
LEFT/RIGHT button, the time zone will move by 30 minutes.
3.4.8 Menu Transparency
From 20% to 100% will give the variable transparency on Video and OSD
screen.
To set menu transparency, press the
UP/DOWN
buttons.
Press the
OK
button and then press the
UP/DOWN
buttons to select
the Menu Transparency , Subtitle Transparency , or Teletext
Transparency . The transparency will be applied on the screen.
3.4.9 Change PIN Code
From here you can change the PIN code from the standard 0000. DO
NOT FORGET IT! Without it, you are not able to access to any of the
functions where the code is required.
You can change password for Parental Lock and Receiver Lock simultaneously.
• Input the current PIN code using the
NUMERIC
buttons on the
remote control.
• In the highlighted new PIN code, input a new PIN code.
• To verify the new PIN code, re-enter a new PIN code in the
highlighted confirm PIN code. If the PIN code is correct,
the message “
Success
” will be displayed on the display window.
Note
• If you forget the PIN code, press the RGYB(Color) button in sequence.
(i.e. Red → Green → Yellow → Blue button) The PIN code will be changed to 0000.
STB_CityCom_Sat_111379_CCR545_Eng.indd 17 2010-08-03 �� 8:27:00