CityCom CCR545, Руководство пользователя

Страница: 12 / 24

12 - ENG
ENGLISH
3. Main Menu Guide
3.1 Installation
Satellite Search
Select the satellite list you want using
UP/DOWN
buttons on the satellite list.
you can go to the right side with OK/RIGHT button and to the left side
with the LEFT button.
• C/KU Switch
You can select C/KU band by selection of switch type.
•
Position (MOTOR DiSEqC 1,2)
After selecting a satellite, please select position number. To change
value, press OK button. The position list will be displayed.
• Degree (USALS)
Press the NUMERIC buttons and enter the degree.
• LNB Freq.
Select the proper LNB frequency referring to your LNB using
OK
and
UP/DOWN
buttons.
•
C-LNB Freq.
When selecting the C/KU Switch is selected as None, the C-LNB Freq
will be dimmed atomatically. Press OK button, and then the C-LNB
Freq. List will be displayed. You can also input the freq. you want.
After inputting freq. using
NUMERIC
buttons, press OK button.
•
LNB Power
Select the LNB Power On or OFF.
•
22KHz
Depending on the user's antenna switch box or LNB. You can supply
either 22KHz by setting ON or not by setting OFF. When selecting the
U-LNB 1 and U-LNB 2, the 22KHz will be dimmed. (MOTOR DiSEqC 1,2).
•
0V/12V
Depending on the user's antenna switch box. You can choose either
0V/12V.
•
Tone Position
Depending on the user's antenna switch box. (off, SAT A or SAT B)
• Press the
INFO(BLUE)
button to set Drive(Fine Drive or Normal Drive)
to run the motor. (MOTOR DiSEqC 1,2 / USALS)
•
Fine Drive/Normal Drive
: To move the motor, press
LEFT/RIGHT
button.
•
Go to zero
: To move the zero position, press OK button.
•
Store to location
: To store the current position, press OK button.
•
East Limit
: To set the east limit by current position, press
OK
button.
•
West Limit
: To set the west limit by current position, press
OK
button.
•
Clear Limit
: To clear the stored limit value, press
OK
button.
•
DiSEqC
You can select and use appropriate port for your DiSEqC switch
box. Press OK button to select DiSEqC List.
(None, DiSEqC A, DiSEqC B, DiSEqC C, DiSEqC D)
•
Longitude (USALS)
Press the
NUMERIC
buttons and enter the Longitude. When the
OK
button is pressed. It can be toggled East/West.
•
Latitude (USALS)
Press the NUMERIC button and enter the Latitude. When the OK is
pressed, it can be toggled North/South.
STB_CityCom_Sat_111379_CCR545_Eng.indd 12 2010-08-03 �� 8:26:59