The SHoW DMX Wireless Data System
User’s Manual
Rev 1.4 11-17-08
38 of 48 Pages
is addressed as 192.168.1.101, subnet 255.255.255.0, you could
set your PC to Static IP 192.168.1.2 with subnet 255.255.255.0
(see Fig. 10 below):
Figure 10, Network Configuration Example
b. To connect the PC via an existing Ethernet Hub or Switch:
i. connect the device’s Ethernet port to the SHoW DMX
Transmitter’s Management RJ 45 Jack using a Standard RJ45
Ethernet Cable
ii. Using the Transmitter’s User interface, go to the Network
Settings/Web Interface menu and configure the Transmitter’s IP
address, Subnet mask, and Gateway to conform to your network’s
settings (you may need to consult your IT System Administrator
for this).
2. Using the PC web browser (e.g. Internet Explorer), navigate to the SHoW DMX
RDM Monitor via the IP address.
3. The SHoW DMX RDM Monitor will launch and open in the first (RF) screen.
