The SHoW DMX Wireless Data System
User’s Manual
Rev 1.4 11-17-08
21 of 48 Pages
To View actual Auto assigned Art-Net ip address .
From the default top screen on the LCD display.
Push Enter.
The display will read: RF Settings
Push Down. Repeat until the display reads:
Network Settings.
Push Enter.
The display will read: ETH Interface.
Push Enter.
The display will read: ETH Data Mode: Auto
Push Down. The display will read: ETH Data IP: x.x.x.x.
(This is the ip address, and is not editable here)
Push Down. The display will read: ETH Data Subnet: 255.0.0.0
(This is the fixed subnet and is not editable)
Push Down. The display will read: ETH Data Gateway x.x.x.x
(This is not relevant to Art-Net)
Push Down. The display will read: ETH MAC: xxxxxxxxxxxx
(This is the transmitter unique MAC address, and is not editable)
Pushing Back will step back up through the menu options until the top default screen is
reached.
Selecting Auto or Custom Mode
From the default top screen on the LCD display.
Push Enter.
The display will read: RF Settings
Push Down. Repeat until the display reads:
Network Settings.
Push Enter.
The display will read: ETH Interface.
Push Enter.
The display will read: ETH Data Mode: (Auto or Custom)
If it is necessary to change the mode, push Enter, followed by Down, followed by Enter
to confirm.
Push Back to step back up through the menu options until the top default screen is
reached.
Setting IP address and DMX Universe in Custom Mode
From the default top screen on the LCD display.
Push Enter.
The display will read: RF Settings
Push Down. Repeat until the display reads:
Network Settings.
Push Enter.
The display will read: ETH Interface.
Push Enter.
The display will read: ETH Data Mode: Custom or Auto.
If it is necessary to change the mode to custom, push Enter followed by Down followed
by Enter to confirm.
Push Down. The display will read: ETH Data IP: x.x.x.x.
This is the ip address.
Push Enter to access the edit mode, then use the cursor buttons to step through and edit
each field.
Push Enter again to confirm.
Push Down. The display will read: ETH Data Subnet: 255.0.0.0
This is the subnet mask.
Push Enter to access the edit mode, then use the cursor buttons to step through and edit
each field.
Push Enter again to confirm.
Push Down. The display will read: ETH Data Gateway x.x.x.x
