The SHoW DMX Wireless Data System
User’s Manual
Rev 1.4 11-17-08
25 of 48 Pages
The 5610 and 5611 SHoW DMX Receiver
IEC Inlet,
for mains power
5610/5611 ShoW DMX Receiver,
Rear View
Front View
5610/5611 ShoW DMX Receiver,
Reset Switch
5PXLRF,
for DMX/RDM Output
DC Power Input Jack,
for battery power
Standard CTI 7"
Omnidirectional Antenna
LCD Display
Control Button Pad
RESET
DMX Output
POWER INPUT
+12VDC 250mA
Figure 4, the 5610/5611 SHoW DMX Receiver
Since the 5610/5611 Receiver is configurable as a half duplex RDM Responder it is
capable of transmitting as well as receiving when used in the RDM mode.
The CTI # 5610 SHoW DMX Receiver is the North American version and meets all North
American (FCC and IC) requirements. The 5610 Receiver’s maximum broadcast power
output is 125mW FCC/395mW ETSI when equipped with the standard CTI 7” 5dBi
Antenna. The 5611 SHoW DMX Receiver is the international version and meets all
North American and CE requirements. The 5611’s maximum broadcast power output is
32mW FCC/100mW ETSI when equipped with the standard CTI 7” 5dBi Antenna. All
other controls and features are the same for both models.
Controls, Connections and Features
Front Panel
LCD Display: This 2 line by 16 character display shows all of the Menu titles, command
options, configuration data, and other text and graphic data. The backlight turns on
whenever a button is pushed and turns off automatically after a preset time-out. The
backlight off time-out is adjustable via the Misc. Menu (see below)
Control Button Pad: This five-button pad is the main control interface
for the 5610/5611 Receiver. The button functions are UP, DOWN,
LEFT/BACK, RIGHT/FORWARD, and ENTER.
ENT
UP
DOWN
R
I
G
H
T
L
E
F
T
