10
Slide the mating Mounting Bracket (attached to the Unit) into the Mounting Bracket Base until
the locking clip engages, and install the provided 8-18 x .500” SS Thread Forming Torx Button
Head Security Screw in the hole on the left side of the Bracket assembly.
Mounting Orientation
The 7400-5707 SHoW DMX Vero Transceiver must be mounted exclusively in an upright
mounting position with the cable entries on the bottom and antenna connector on the top as
shown in the drawing above.
Pipe Mounting
The SHoW DMX Vero can also be mounted on a pipe.
Attach the Mounting Bracket Base to a pipe using a stainless steel hose clamp as shown:
Slide the mating Mounting Bracket (attached to the Unit) into the Mounting Bracket Base until
the locking clip engages, and install the retaining Screw.
