12
Installing the Cover
The 7400-5707 SHoW DMX Vero Transceiver has a two part cover, with the outer plastic cover
connected to the inner metal cover with a hinge. Install the metal inner cover using the eight
provided 6- 32 x .375” SS Truss Head Machine Screws. Hand install these screws until the
screw threads are fully engaged with the mating PEM Nut, then tighten to 4 inch pounds.
The outer cover is then closed and secured with the provided 8-18 x .500” SS Thread Forming
Torx Button Head Security Screw, installed in the provided hole on the left side of the cover
assembly.
