7
System Compliance Information
The 7400-5707 SHoW DMX Vero Net Transceiver is ETL Listed,
Conforms to UL 508A
The 7400-5707 SHoW DMX Vero Net Transceiver is CE Certified
Standards Applied:
EN 55203-1: 2009
EN 55203-2: 2009
EN 301 489-1 V1.8.1
EN 301 489-3 V1.4.1
EN 60950-1:2006 / A1:2010
FCC Rules, Part 15, Subpart B, Sections 15.107 and 15.109
Products Conform to CE Marking Directive 93/68/EEC
All SHoW DMX Neo models are RoHS compliant
Safety Notices, Ratings and Power Requirements
Please read this entire manual before using your new equipment. Please keep the manual in a
safe place so you can refer to it in the future as required.
The SHoW DMX Neo System is intended for use only by qualified professionals. Connection,
installation and hanging of this equipment must be performed in accordance with all pertinent
local, regional and national safety codes and regulations.
The 7400-5707 SHoW DMX Vero Transceiver is intended for indoor or outdoor use.
The unit enclosure is rated NEMA 4 / IP66.
Rated operating voltage; 100-240VAC 50/60 Hz, 1A max.
This device must be provided with a 20A branch circuit breaker or equivalent suitable external
disconnecting device.
Maximum operating temperature: 0°C - 40°C.
Warning: The 7400-5707 SHoW DMX Vero Net Transceiver must be mounted exclusively in an
upright mounting position with the cable entries on the bottom and antenna connector on the top
as shown in the Installation guide. See the Installation Guide in this document for details.
RF Exposure:
The antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20cm from all persons and must not be collocated or operating in
conjunction with any other antenna or transmitter.
