City Theatrical 5792 SHoW DMX Neo, Руководство пользователя

Страница: 6 / 40

2 Product Overview
The SHoW DMX Neo (Neo) radio module was designed by City Theatrical, Inc. (CTI) to use in the
SHoW DMX line of wireless theatre lighting control equipment. This equipment is used for
wireless transmission and reception of DMX512-A and RDM protocol data.
The Neo radio module was designed to provide enhanced interference rejection, to reduce
latency of both DMX and RDM packet delivery and provide an easier interface to implement.
The Neo radio module can operate in two different modes: Neo and Classic. It is recommended,
however, to implement only Neo mode. Classic mode is backwards compatible with the
previous generation technology, formally known as SHoW DMX. .
The SHoW DMX product line uses SHoW IDs to allow devices to communicate with each other.
As long as two (or more) devices are programmed to share a SHoW ID, they will be able to
communicate. The SHoW ID is programmed into the module via the “config” protocol, RDM or
an external button.
2.1 Part Numbers
The Neo radio module comes in two different versions. The part numbers and differences are
found below.
2.1.1 5792 SHoW DMX Neo Radio Module for OEM
The 5729 uses a 40-pin low profile header. The header contains all signals allowing the unit to
be integrated in the most flexible way. The signals are all TTL (transistor –transitor logic) and
the voltage source is fixed at 5Vdc.
2.1.2 5794 SHoW DMX Neo Radio Module for W-DMX
The 5794 uses a 10-pin header. The header contains signals that directly map to the W-DMX
module. This version has an on board RS-485 driver and can accept voltages of 5Vdc fixed or 7-
30Vdc using the onboard switching regulator.