City Theatrical 5792 SHoW DMX Neo, Руководство пользователя

Страница: 14 / 40

Table 4: SHoW DMX Neo Radio for OEM Signal Descriptions
Pin Type Signal Name Function Notes
1 GND GND Signal Ground
3 VCC VCC 5VDC
5 VCC VCC 5VDC
7 O DMX_VALID DMX Valid 1/2sec toggle rate when not present
9 O SIG_LOW Signal Strength Low Active high
11 O SIG_MED Signal Strength Medium Active high
13 O SIG_HI Signal Strength High Active high
14 O TxD Transmit data from radio
15 I Tx/Rx Selects Tx/Rx mode low = Tx, high = Rx, Internal Pull-up
16 I RxD Received data from host
17 I GPI1 General input Bit 1 Controls RDM personality, see docs
19 I GPI0 General input Bit 0 Controls RDM personality, see docs
20 GND GND Ground
21 GND GND Ground
23 O RED RGB LED Red SHoW Baby 5 SHoW ID Indication
26 O BLUE RGB LED Blue SHoW Baby 5 SHoW ID Indication
27 O GREEN RGB LED Green SHoW Baby 5 SHoW ID Indication
28 O IN_RANGE Rx in range of Tx Active High
29 I LN Mode Classic/Neo mode low = Neo, Internal Pull-Up
30 I 485 Rx Only
Wired RDM Responder
mode
Active Low, Internal Pull-Up
31 O 485 Dir RS485 Direction Control RX = Low, TX = High
32 I Mode Bit 0 Mode Bit 0 Internal Pull-Up
34 I Mode Bit 1 Mode Bit 1 Internal Pull-Up
36 I WakeUp Take radio out of sleep Active Low, Internal Pull-Up
37 I Bootload Enter Boot Loader mode Active low, Internal Pull-Up
38 I
µ
P_RESET Radio Reset Active Low
39 VCC VCC 5VDC
40 GND GND Signal Ground
5.1.1 Description of Signal Pins
Pin 7 – DMX_VALID:
This pin indicates the presence of valid DMX frames at the input when
operating in server mode or valid DMX frames at the output when operating in client mode.
When no valid frames are present, the pin toggles at a ½ second rate.
Pin 9, 11 & 13 – SIG_LOW, MED, HI: These pins provide an indication of signal strength. The
flowing chart defines the state of the outputs.