Citronic MPCD-4 Ultima, Руководство пользователя, Страница: 7 / 35

®
12. Pitch selection LEDs
These LEDs give a visual indication of the pitch range that is currently selected as follows:
•
±4% - The % (11) button will be illuminated red
•
±8% - The % (11) button will not be lit and the 8% LED will be illuminated in red
•
±16% - The % (11) button will not be lit and the 16% LED will be illuminated in blue
•
±100% - (CD-A ONLY) The %, 8% and 16% will be illuminated
13. Time Select Button
The time select function will switch the time value on the LCD display from Elapsed play time, track remaining
time and total remaining time.
Note: Total remaining time is not available on MP3 discs.
The Time button is dual function, it will also activate relay play mode, see section on activation further in the
is manual.
14. SGL/CTN Button
This function allows the user to select single play (when the track reaches the end the CD will stop) or
continuous play (when the track ends the next track on the CD will play in order)
15. FL Tube Display
This highly visible display, gives information on selected feature and track/CD information See “Display
Section” for more detail.
16. Pitch Slider
This slider is used to set the pitch of the playing CD. To activate the slider press (9) the slider can then be
used to adjust the pitch/BPM of the track. The amount of pitch adjustment is determined by the pitch range
select button (11)
17. Seamless Loop IN Button
IN – This button has two functions. It can be used to set a CUE point on the fly, press once at the desired
position to set an instant CUE point, this also sets the beginning of the loop feature.
18. Seamless Loop OUT Button
OUT – This button when pressed selects the end point for the seamless loop. Press once to set the end point
the loop will then begin from the IN point and continuously loop until the OUT button is pressed once again to
exit the loop feature
19. Reloop Button
RE-LOOP – This button is used to re-enter the seamless loop and can be pressed at anytime as long as the
loop created is on the same disc. This button can also be used to create a stutter when pressed repeatedly.
20. Memory Button
This button allows the user to program up to 3 cue points or 3 loops to the 3 ‘Memory Bank Buttons’ (21) the
loops or cue points can be recalled at any time even when the disc has been removed and reloaded at a later
time. Pressing and holding this button for 4 seconds will save the cue/loop points into the IMS memory, so
when the disc is next inserted the cue/loop points will be recalled.
21. Memory Bank
These 3 buttons are used to store 3 cue points if the cue point is the beginning of an active loop the memory
bank will save the loop information. These buttons can also be used to stutter the music, pressing repeatedly
will return the track to its cue point but remain in play mode.
22. BPM Button
This button will switch between Auto and Manual BPM.
23. TAP button
Use this button to manually TAP the BPM of a track. This is particularly useful when a track has a weak or no
continuous beat.
24. Scratch Button
This button will activate the scratch mode; this is available for both CD and MP3. The button will illuminate
Blue when active. Using the jog wheel (2) move in the desired direction to produce the scratch, when the jog
wheel is not moving normal play will resume.